Products from TK-3DPrint
No results were found for the filter!
X/Y Microswitch Endstop PCB for VORON. Matching microswitches (D2F-..) can be ordered here . Contents: 1x PCB 1x Molex 70553-0003 STL & Manual: https://github.com/VoronDesign/Voron-Hardware/tree/master/Microswitch_Endstop...
Content
1 Piece(s)
€3.90
*
Z-Endstop PCB according to design of Hartk1213. Matching microswitches (D2F-..) can be ordered here . STL & Manual: https://github.com/VoronDesign/Voron-Hardware/tree/master/Microswitch_Z_Endstop Contents: 1x Z-Endstop PCB 1x 2-Pin...
Content
1 Piece(s)
€2.50
*
Afterburner Toolhead ERCF PCB according to design by Hartk1213. The item contains only the PCB! STL & Manual: https://github.com/VoronDesign/Voron-Hardware/tree/master/Afterburner_Toolhead_PCB
Content
1 Piece(s)
€4.90
*
ERCF Easy Board PCB according to design by Tircown. The item contains only the PCB! STL & Manual: https://github.com/Tircown/ERCF-easy-brd
Content
1 Piece(s)
€4.90
*
Sold out
ATC Semitec 104GT-2 / 104NT-4-R025H42G NTC 100k with M3 screw for installation e.g. at printbed. The thermistor or the component is partially assembled. Details: Thread: M3 Temperature: up to 280°C
Content
1 Piece(s)
€6.90
*
Shaft / axis 5x30mm DIN 6325 Details: Material: Steel ( hardened ) Diameter: 5mm Length: 30mm
Content
1 Piece(s)
€1.90
*
-36
This set includes the cover panels for the Bottom-, Top- and Rear side for your VORON 2.4 Printer. The panels are milled acc. VORON Design Specification. Update 24.02.2022 Compatible with VORON V2.4r1 With Release 2, the cut-outs in the...
Content
1 Set
€34.90
*
€54.90
*
previously
€54.90*
This set includes the cover panels for the Bottom-, Top- and Rear side for your VORON 2.4 Printer. The panels are milled acc. VORON Design Specification. Details: VORON: V2.4r2 300 Material: Aluminium Composite Panel Strength: 3mm Color:...
Content
1 Set
€59.90
*
€64.90
*
previously
€64.90*
This set includes the cover panels for the Bottom-, Top- and Rear side for your VORON 2.4 Printer. The panels are milled acc. VORON Design Specification. Details: VORON: V2.4r2 350 Material: Aluminium Composite Panel Strength: 3mm Color:...
Content
1 Set
€69.90
*
€74.90
*
previously
€74.90*
Hint!
VORON 2.4r2 printed parts printed with ABS/ABS+. Save time and start immediately. Starter Set: The set includes all needed items for a fast and easy start. Save time and start immediately. Decorative or unnecessary parts are not included...
Content
1 Set
€149.00
*
Shaft / axis 5x60mm, flattened on the long side. Details: Material: Steel Diameter: 5mm Length: 60mm
Content
1 Piece(s)
From €3.90
*
Cutting tool for precise and easy cutting of bowden/tubes. Details: Material: Plastic Color: Blue
Content
1 Piece(s)
€2.90
*
Viewed