Top seller
Sold out
No results were found for the filter!
VORON X/Y-Endstop PCB
X/Y Microswitch Endstop PCB for VORON. Matching microswitches (D2F-..) can be ordered here . Contents: 1x PCB 1x Molex 70553-0003 STL & Manual: https://github.com/VoronDesign/Voron-Hardware/tree/master/Microswitch_Endstop...
Content
1 Piece(s)
€3.90
*
VORON Afterburner Toolhead ERCF PCB
Afterburner Toolhead ERCF PCB according to design by Hartk1213. The item contains only the PCB! STL & Manual: https://github.com/VoronDesign/Voron-Hardware/tree/master/Afterburner_Toolhead_PCB
Content
1 Piece(s)
€4.90
*
VORON Z-Endstop PCB
Z-Endstop PCB according to design of Hartk1213. Matching microswitches (D2F-..) can be ordered here . STL & Manual: https://github.com/VoronDesign/Voron-Hardware/tree/master/Microswitch_Z_Endstop Contents: 1x PCB 1x 2-Pin JST-XH connector
Content
1 Piece(s)
€2.50
*
Pulley 80T-2GT 6mm Belt Width / 5mm Bore - Black
Pulley 80T-2GT in black color for 6mm timing belt. Details: Material: Aluminium Teeth: 80 Belt width: 6mm Bore diameter: 5mm The coating may have scratches or marks.
Content
1 Piece(s)
€8.90
*
Idler 20T-2GT 9mm Belt Width / 5mm Bore - Black
Idler 20T-2GT-9 with teeth in black color for 9mm timing belt. Details: Material: Aluminium Teeth: 20 Belt width: 9mm Bore diameter: 5mm The coating may have scratches or marks.
Content
1 Piece(s)
€2.50
*
Pulley 16T-2GT 6mm Belt Width / 5mm Bore - Black
Pulley 16T-2GT-6 in black color for 6mm timing belt. Details: Material: Aluminium Teeth: 16 Belt width: 6mm Bore diameter: 5mm The coating may have scratches or marks.
Content
1 Piece(s)
€2.50
*
Shaft 5x30
Shaft / axis 5x30mm DIN 6325 Details: Material: Steel ( hardened ) Diameter: 5mm Length: 30mm
Content
1 Piece(s)
€1.90
*
RobotDigg MGN9H, 300mm, 440C
Pre-Installed RobotDigg MGN9H Linear rail with carriage. The linear rail can be easily mounted on an aluminium extrusion e.g. 2020. Details: Material: 440C Length: 300mm Content: 1 x MGN9H Carriage 1 x 300mm Linear rail The linear guide...
Content
1 Piece(s)
€19.90
*
VORON 2.4r2 Aluminium Composite Set 300
This set includes the cover panels for the Bottom-, Top- and Rear side for your VORON 2.4 Printer. The panels are milled acc. VORON Design Specification. Details: VORON: V2.4r2 300 Material: Aluminium Composite Panel Strength: 3mm Color:...
Content
1 Set
€64.90
*
Voron 2.4r2 Aluminium Composite Set 350
This set includes the cover panels for the Bottom-, Top- and Rear side for your VORON 2.4 Printer. The panels are milled acc. VORON Design Specification. Details: VORON: V2.4r2 350 Material: Aluminium Composite Panel Strength: 3mm Color:...
Content
1 Set
€74.90
*
-36
VORON 2.4r1 Aluminium Composite Set 250
This set includes the cover panels for the Bottom-, Top- and Rear side for your VORON 2.4 Printer. The panels are milled acc. VORON Design Specification. Update 24.02.2022 Compatible with VORON V2.4r1 With Release 2, the cut-outs in the...
Content
1 Set
€34.90
*
€54.90
*
previously
€54.90*
Hint!
VORON 2.4r2 Printed Parts (Black/Red)
VORON 2.4r2 printed parts printed with ABS/ABS+. Save time and start immediately. Starter Set: The set includes all needed items for a fast and easy start. Save time and start immediately. Decorative or unnecessary parts are not included...
Content
1 Set
€149.00
*
Viewed